Author: Ethan Frank

Preparation of Cyclohexanol Cyclohexanol: For the preparation of nickel catalyst, small pieces of pumice stone of a convenient size are soaked in a concentrated solution of nickel nitrate in distilled water, and heated in a basin over a free flame until the nitrate has been converted into the nickel oxide. Cyclohexanol: Alternatively, the pumice is impregnated with a paste of its own weight of nickel oxide and distilled water, and dried on a water bath. The nickel oxide is reduced by heating in a current of pure, thoroughly dried hydrogen in a combustion tube. A combustion tube 1 metre long is…

Read More

Preparation of Aluminum Sulfide Aluminum sulfide can be prepared directly from aluminum and sulfur, but when the finely divided substances are mixed and the mixture is heated, either the sulfur entirely distils off without any reaction taking place, or if a reaction starts it is too violent to control. Lead sulfide could be as a source of the sulfide ion because this substance is not volatile and cannot escape before it reacts, furthermore, the reaction is not too violent. 359 g of powdered lead sulfide and 27 g of granulated aluminum are mixed together. The mixture is transferred in the clay…

Read More

Synthesis of Potassium Sulfide Preparation of potassium sulfide By treating potassium hydroxide with an excess of hydrogen sulfide potassium hydrosulfide (KHS) forms, which with further treatment with the same quantity of potassium hydroxide yields potassium sulfide: Hydrogen sulfide is passed through 3 parts of concentrated potassium hydroxide solution until no further absorption takes place. Then 2 parts of concentrated potassium hydroxide solution is added in order to neutralize potassium hydrosulfide. The rule, however, is to add only two-thirds of the quantity of solution of potassium hydroxide, as it is better the preparation should contain a little potassium hydrosulfide than that free…

Read More

Synthesis of Sulfur Trioxide Preparation of Sulfur Trioxide Sulfur trioxide is formed by reacting sulfur dioxide with oxygen in the present of platinum catalyst. 40 cm long, hard melted glass tube is connected to the ice-cooled receiver. In the tube 10 cm platinized asbestos is placed. Platinized asbestos could be prepared by treating asbestos with the 5 ml of 10% chloroplatinic acid solution and then drying and applying red heat. Heated chloroplatinic acid decomposes and the fibers of asbestos is covered by platinum (catalyst). Platinized asbestos after each use should be well washed with water and heated in the red…

Read More

Synthesis of Hydroiodic Acid Preparation of Hydroiodic Acid Hydroiodic Acid: Rubber stoppers, as well as direct light, should be avoided in all operations with iodine, hydrogen iodide and hydroiodic acid. Platinized asbestos is prepared by soaking 3 g of asbestos in 7 ml of 10 % hexachloroplatinic (IV) acid, evaporating the mixture to dryness, and igniting the residue at red heat. A 250-ml distilling flask with a short side-arm at least 10mm wide. The flask is fitted with a gas inlet tube reaching just above the surface of 100g of pure iodine contained in the vessel. The flask is connected…

Read More

Synthesis of Hydrobromic Acid Preparation of Hydrobromic Acid Hydrobromic Acid: Of the six methods given here, the first three may be used for the production of gaseous hydrogen bromide as well as for aqueous solutions of the gas; rest of them could be employed only for making the constant-boiling hydrobromic acid acid. The apparatus for hydrobromic acid is made of a gas-washing bottle filled with water, connected to a distilling flask filled with 50 ml of bromine cooled in ice with the inlet tube leading almost to the bottom of the flask. The inlet tube is connected to a Pyrex…

Read More

There are more than five billion iPhone users worldwide, which represents 66% of the population. Technology advances are making it easier for people to communicate with each other. While iPhones are great and help make life more convenient, they don’t come without problems. There are a number of common iPhone problems that people experience. Some issues have easy fixes and others require more work. This guide is going to tell you about three common issues and how to fix them. Keep reading so you’re prepared if your iPhone starts acting abnormally. 1. Frozen Screen One of the most frustrating issues…

Read More

Are you holding on to a collection of old VHS tapes? Maybe they have been tucked away for years and have taken up space, or perhaps you find it difficult to say goodbye to your old memories. No matter your situation, converting your VHS tapes to DVD or some other digital format can be a great way to preserve your family memories for future generations. But if you are someone who isn’t technically savvy, how can you expect to convert your VHS tapes? Don’t worry – you actually don’t need a computer to transfer your favorite memories onto a modern,…

Read More

Do you want to increase your merchandise technique to improve your brand visibility? If yes, is the answer from your end? Then you must go through some crucial factors that can boost your business to the next level. There is a saying in marketing, “ Visibility of the product will increase your sale” This saying holds good when you use the merchandising technique to boost your brand image. You need to know the facts well before selecting the right end. Then, figure out changes to boost your brand to the next level. Ensure that the scope for errors must be…

Read More

Do you need to have a new HVAC system installed in your home? If so, there are almost 125,000 HVAC companies that can help you put one into place. Before you call on the best one in your area for help, though, you’ll need to learn more about the different types of HVAC systems that are available. It’ll allow you to pick the right HVAC system type for your home. So, what are the types of HVAC system options you can choose from? Check out a few of the top ones below. Split Systems More often than not, homeowners opt…

Read More